Wednesday, September 25, 2013

StencilGirl Stencils & Wood Icing!


Hi! Mary Nasser here to share with you a great project to try when you want to use lots of StencilGirl stencils and use Wood Icing, too! Today I'm using five stencils: Mary Beth Shaw's Rafters stencils (both the 9"x12" and the 6"x5" sizes), Terri Stegmiller's Sign Posts stencil...

...Wendy Aikin's Crazed stencil...

...and a cute little 4"x4" mini Tile stencil from the January StencilClub mailing...

I've had lots of people ask about how to use Wood Icing with StencilGirl stencils, so I'm going to show you how! Wood Icing is a fabulous water soluble, acrylic based texture paste. It has the consistency of peanut butter and is easy to apply with a palette knife. It doesn't shrink or crack like modeling paste does sometimes. And it's also porous, which means you can apply not only acrylic paint or encaustic, but also watercolor and soft pastels! Okay, enough great things said about Wood Icing. Time to get on with the tutorial!

For this project, I used a 12"x12" Ampersand Artist Panel. I use painter's tape to help hold each stencil in place as I applied the Wood Icing. 

Using a 3" steel trowel palette knife, I applied the Wood Icing directly onto the stencil taped to the board. Apply the Wood Icing about the same thickness as the stencil. This doesn't have to be perfect! We're going to lightly sand this later. 

After you've applied your Wood Icing, carefully remove your stencil from the board and clean your stencil and palette knife right away. I use baby wipes to clean my stencils and palette knife so as not to wash Wood Icing down the drain.

In the steps below, you can see me adding the mini Tile stencil to the top, then the Rafters stencil to the left.

Lastly, I masked off one rectangle at the bottom with painter's tape, applied Wood Icing with a palette knife, let it set a few minutes, then carved back into it with a Scratch Art wood stylus tool. If you don't have this tool, just use the pointed end of a pencil or wood skewer! Again, carefully remove the tape before the Wood Icing dries.

After the Wood Icing dried, I gave the entire surface a light sanding with a fine grit sanding sponge.

Then I began masking each section off with painter's tape and began to paint.
The 6"x5" Rafters section in the upper left-hand corner was painted with unbleached titanium acrylic, the Sign Posts section on the right-hand side was painted with cobalt teal acrylic. And the scribbled section at the bottom was painted with iridescent rich gold acrylic.

For the large Rafters section on the left, I added Haematite Inka Gold. This is a nontoxic, water-based beeswax medium that's super-easy to use, too. I just applied it with my fingers then buffed immediately with a paper towel to this lustrous shine. I used Copper Inka Gold in the Crazed stencil section.

Next, I placed the mini Tile stencil onto an old survey map and traced both the inside and outside of the stencil with a pencil. I cut where I had traced, and adhered this map piece to the board using acrylic matte medium.

Then I placed the mini Tile stencil onto the painting itself and pounced on cobalt turquoise acrylic using my ink sweeper. I placed the small Rafters stencil back onto that section and pounced in iridescent antique bronze acrylic. I thinned iridescent bronze acrylic with acrylic gloss medium, brushed this onto the bottom scribble section, then gently wiped this away, allowing the bronze to remain in my carving to accentuate those marks.

I placed the Crazed stencil onto the center section, then pounced in iridescent copper light acrylic. Then the Sign Posts stencil was placed back onto the right section, and unbleached titanium acrylic was pounced back through the stencil. Then I used more acrylic matte medium to adhere some text from vintage books onto the sign posts! The very last step was applying little rivets to the large Rafters section on the left with a Viva bronze pearl pen.

Ta-da!

And here are a couple details of the work:


I hope I've inspired you to experiment and play with some new media.
Have fun painting and layering with Wood Icing and StencilGirl stencils!
Wishing you all the best,

Be sure to come back tomorrow for Jessica Sporn's Test Drive! 

31 comments:

  1. This was fantastic. We don't see many wood icing tutes. You have the knack for sure.

    ReplyDelete
  2. What is wood icing actually used for? I wonder if there is something similar here in the UK?

    ReplyDelete
    Replies
    1. Don't know if there is something similar to Wood Icing in the UK, Anne.
      But it can be used to create texture on a variety of substrates, from stretched canvas to wood to paper mache, etc.!

      Delete
  3. Where can I purchase Wood Icing? Can I find it at the hardware store, or Dick Blick? Thanks:)

    ReplyDelete
    Replies
    1. You can purchase it here: http://stencilgirlproducts.com/wood-icing
      from Mary Beth Shaw! :)

      Delete
  4. Looks great Mary!!!! I love using my new stencils and cleaning them with the baby wipes is a great idea.. When I clean mine I have started laying them on a blank canvas paper or water color paper and then wipe away. I get a second use out of the medium and a new background for a later piece of art work. I hate to waste any art supply or you just might say I'm "CHEAP" but I prefer
    "Frugal" :)

    ReplyDelete
    Replies
    1. Thank you, Carol!
      Your idea sounds wonderful getting a second use out of the medium creating an additional background! Fabulous!

      Delete
  5. Very interesting! Ideas swimming! Love the colors and stencils you chose. I am loving these stencils!
    Janelle Rourke

    ReplyDelete
    Replies
    1. Yay! So glad to hear you've got ideas percolating, Janell!

      Delete
  6. whew hew!! Love all that you did with the wood icing. So many great details. Loving the stencils.

    ReplyDelete
    Replies
    1. Thanks so much, Monica! I love these stencils, too! :)

      Delete
    2. Love the stencils!! I have always wanted to try the wood icing out.. soon, soon. LOL

      Delete
    3. I hope you try Wood Icing, Robyn. It's so fun to play with and create texture!

      Delete
  7. Thank you so much for sharing this process, Mary! The different textures in this piece are wonderful! I think I definitely need to try out wood icing -- it looks like a great product.

    ReplyDelete
    Replies
    1. I hope you try out Wood Icing, Debbie! You can create all kinds of textures with it!
      I love having it as a medium in my studio!

      Delete
  8. Wonderful work. Thanks for sharing the process

    ReplyDelete
  9. Thanks so much for the tutorial! I haven't used wood icing, but see it needs to be in my studio. Very cool!

    ReplyDelete
    Replies
    1. Glad you enjoyed the tutorial!
      Wood Icing is very cool!! :)

      Delete
  10. what a really fantastic project Mary! Thanks so much for the step outs-you've done wonders with all those great stencils!

    ReplyDelete
    Replies
    1. Thank you, Linda! Glad you enjoyed seeing the process! :)

      Delete
  11. Wow I like this, it's quite unique to some of the others!! Very nice stencils!

    Hugs Giggles

    ReplyDelete
  12. Replies
    1. Thank you, Arnoldo. It's great fun to play with textures and mixed media!

      Delete
  13. I enjoyed seeing how you used the stencils. Excellent ideas. Blessings, Janet PPF

    ReplyDelete
  14. this stuff looks amazing, but very sad we cannot get it in australia!!
    love love love the stencils!!

    ReplyDelete

If you are entering a GIVEAWAY, please add your email address in the event we need to contact you.

To avoid SPAM, please write it like this:

marybeth (at) stencilgirltalk (dot com)

Thank You!