Hi, I'm Magdalena Muldoon. I am the owner of MercArt. MercArt was founded in 1970 in Mexico City by Magdalena Barrena (my mom).Since then, MercArt has been offering only the best quality products. In 2002 I moved to Texas with my husband and three daughters and I created MercArt USA, becoming the first company in the US to offer the best quality and most complete variety of tools and metals for Metal Embossing. We are commited to excellence, not only in our products, but also in our Craft.
I'm here today to show you how to
emboss metal with stencils!
First decide what to emboss: Place the aluminum (color up) over the stencil and over the acrylic IF you want the white part of the design to be embossed. IF you want the blank or empty parts of the design to be embossed, then place the stencil on the color side, and flip the metal to the back over the acrylic.
I am using two StencilGirl stencils today. Large Tribal hand and Small Segments.
Small Segments is the Deal of the Day at StencilGirl Products!
1. Rub the metal against the stencil with a paper stump until you can clearly see the design.
2. Outline every part of the design with the pointy part of the Teflon D-01 tool.
3. Flatten any bump on the metal with a paper stump.
4. For the background, place the metal over the stencil and rub with the paper stump to see the design.
5. Outline each line with the Teflon D-01 tool.
6. Remove the color off the embossed areas with a sanding block.
7. Use the thin Fiber Glass tool to remove the color from small or specific areas.It
removes the color better than the sanding block. (Remember to clean any fiber glass residue with a damp paper towel).
8. Add a border with any Decorative Wheel. This is done at the back of the metal and on the suede.
9. Rub the metal with your choice of any Gilders Paste color to add several patinas and tones to the metal.
10. At the back of the metal and over the suede, emboss assorted areas of the design with the Cup and Ball and the paper stump to create a bigger dimension and make the metal “puff”
11. Fill the embossed areas at the back with MercArt’s “Filling Paste” and let it dry. This will prevent any embossed areas from being pushed down.
Here is another version with a slightly different color:
Where You Can Find Me
Glass or acrylic (surface to work on)
Gilders Paste in assorted colors: Foundry Bronze, German Silver, African Bronze, and Copper.*
Available Gilders Paste colors @ MercArt: Rich Gold, African Bronze, Copper, Iris Blue, Verdigris, Slate, Foundry Bronze, Sandalwood, Rust, Patina and German Silver