- If it costs more than a few bucks or is something with sentimental value, I leave it for a collector. I'm not interested in upcycling anything of real value. I want to have fun with my projects and to allow myself the luxury of messing it up. I never want to feel guilty about cutting up the hand tatted table linen that my great grandmother made to give to my grandmother on her wedding day. On the other hand, I do like the feeling of breathing new life into a piece that I find at Goodwill that is made with someone's loving hands. I believe that a piece with such a history can make my work richer, especially if I'm repurposing something that someone's heir destined to be of no value to them.
- If the price is right I won't hesitate to bring home textiles that are stained and/or dirty. This doesn't scare me off since I can usually either work the stain into my design or cut around it. However, I will always leave the fabric on the shelf if it has multiple rips, tears, or slits as these can be signs of dry rot, a condition that is irreversible. Dry rot can infect a piece of fabric if it is exposed to moisture for a period of time without being able to properly dry. Eventually a microscopic fungus develops which weakens the fibers and makes the fabric brittle as it sadly continues on its journey to become, as Kansas lamented, "Dust in the Wind".
- When I do bring vintage textiles and laces home I follow this process to clean and brighten them. (Note: Delicate fabrics should be treated gently through out the entire process.)
- Fill a tub or sink with enough cold water to cover the fabric. Submerge and gently swish the fabric around in it. Drain the dirty water and repeat this process until the water is no longer a strong brown or yellow color.
- Refill the sink with really hot water and dissolve a scoop of Oxiclean Odor Blaster detergent in it, (cold water would cause the detergent to clump). Gently swish the fabric through it and then let soak for an hour or so. Drain and repeat until the water is clear.
- Rinse the fabric under running water until all of the detergent is gone. Roll the fabric in a thick towel to blot out as much moisture as possible. Hang outside to dry.
Project #1 - Rusted Fabric
- Gloves and an apron, (you should always wear gloves when handling rust),
- Recycled plastic store bags to protect your work surface and to steam your rusty bundle under the sun,
- Rusty bits, (nails, screws, drill bits, graters, tools, etc... raid your basement, scour your garage, look down when you walk to find all of the discarded rusty goodness - the flatter the better),
- Cotton or other natural fabric, (I've not tried this yet with wool, but I don't see any reason not to),
- String to tie up your rusty bundle of goodness,
- Spray bottle (instead of buying one new, consider recycling and a spray bottle from another product - I used an old eyeglass cleaner spray bottle),
- White Vinegar,
- Table Salt,
- Tub or bowl of water.
Rust Printing Process:
- I like to do this outside on a table covered with a deconstructed cardboard box followed by a layer of plastic bags.
- Soak natural fiber fabrics a few minutes in white vinegar. Wring out excess.
- Fill a spray bottle with 50% vinegar and 50% water.
- Lie the fabric flat on the table with the front facing up.
- Put on your gloves. Place rusty objects out on the dampened cloth. Spray the metal items with more white vinegar.
- Roll the cloth into a tight bundle and secure with string. The better the contact between the cloth and the object, the stronger your print will be. If your bundle appears dry then respray with the vinegar.
- Place your rusty bundle into a sealed plastic bag and set it in the sun to "steam and bake" until you're satisfied with the rust you see. (This could take anywhere from a few hours to a few days depending of the amount of rust in the bundle and the strength of the sun.)
- Check your bundle a few time a day. Spritz the rust bundle with the vinegar solution if it becomes dry. I check my bundles every morning and every afternoon when I got home from work.
- When you're happy with the rust, put on your gloves and unroll the bundle. Set the rusty bits aside to use another day. (I store them in plastic zip lock bags so they don't contaminate my other working tools that I would cry if they became rusty.)
- Rinse the fabric in a bowl of salt water. This will stop the rusting process and keep the rust from eventually burning a hole through the fabric.
- Hang your rusted fabric out in the sun to dry and enjoy!
Project #2 - Bleached Denim
Supplies You Will Need:
- I recommend wearing gloves and an apron for this project and that you work in a well ventilated area, preferably outdoors in the sunshine, (bleach can really wreck havoc on your hands and clothing).
- 100% cotton denim - Tip: Head to the men's section of the thrift store to find 100% cotton denim. Look for Levi's and Wrangler brands as there is a good chance they will fit the bill. Men's jeans tend to cost less and as a bonus you'll probably end up with more fabric to work with.
- Piece of cardboard of other stiff substrate covered with a recycled plastic store bag.
- Repositionable Tacky Spray, (I used Aleen's).
- StencilGirl® Stencils (I used The Pomegranate Seeds Grape Apple Flower Mask by Valerie Sjodin)
- Deli paper,
- Bull clips, rocks, or other items to hold the denim flat as it dries.
- Spray Bottle filled with bleach.
Bleached Denim Process:
- Place a piece of denim face up on a flat substrate covered with a plastic bag.
- Spray the back of the stencil with a tacky spray. Wait one minute.
- Press the stencil tacky side down onto the denim. Place a piece of deli paper over the stencil and burnish it down with your fingers to ensure good contact between the denim and the stencil. Remove the deli paper.
- Spray the surface with the bleach.
- Use bull clips, rocks or other item to hold the denim in place while it dries.
- Leave the denim out to dry in the sun for a few hours until you are satisfied with the amount of fading.
- Wearing gloves, remove the stencil. Set it aside to rinse when you have a free minute.
- Run cold water over the denim to rinse out all of the bleach and halt the bleaching process.
- Hang the denim out to dry, admire your work and enjoy!
Technique #3 - Cyanotype Sun Prints
- You don't need to stick to neutral colored fabrics. I used a vintage quilt block as the base for this cyanotype. The five circular designs are stencils from my Crest Stencil. I loved the vintage blue and white squares of the original quilt next to the cyanotype crests.
- Don't be afraid to cut up your stencils to make them yours. I used a craft knife to free my Four Bells Stencil and my Trivet Due Stencil from their bonds to create the focal point of this layered cyanotype on a damask, (or raised woven pattern) vintage napkin.
- Go ahead and mix your stencils with real plant material. Pictured below left to right and clockwise is my Ginger Jar stencil , my Central Grid Trivet Stencil, and my Four Bells Trivet Stencil mixes with dried flowers and leaves. The small trivet stencils make for great planters/vases.
- Having a range of blues makes for even better collage fodder. You can lighten your cyanotypes and create different shades of blues, greens and yellows by toning them in a bath of soda ash.
- Expect the unexpected. This print bleached out much faster in the soda ash bath than I had anticipated. But I 've come to love it and think that it will make for a great background in my art journal. I used three stencils for this one: the Jardiniere Stencil, the Four Fountains Trivet Stencil, and the 9X12 from the December 202 Block Prints Stencil Club Set.
The Cyanotype Process
When I took it out of the sun and removed the stencils a few hours later the background had turned brown and the areas that were covered by the stencils and plant material were shades of an eerie yellow-green.
During the first water bath the colors began to strengthen.
After the water bath the prints were hung to dry. It takes 24 hours for them totally oxidize and reach their full beautiful color. (BTW I think the pic below is evidence that I really am addicted to this printing process. Rust printing really was my Gateway Drug :))
Many thanks to Shari Replogle for reigniting my love of cyanotype sun prints. I recently took her online Cyanotype, the Magic of Alternative Photography Workshop and was truly blown away with all of the techniques. She took the art so much farther than I ever dreamed existed.































